CERRXIAN AC Digital Meter,AC 80-260V 100A LCD Display Digital Current Voltage Current Power Energy Consumption Frequency Power Factor Table With Closed Type CT Multi-Function Power Monito

CERRXIAN AC Digital Meter

REGULAR PRICE: £20.99

  • Multi-Function Power Monitor: Electrical parameter measurement function (voltage, current, active power, energy, frequency, power factor), measuring voltage range AC 80V-260V; current range 0-100A; power range 0-22kW; energy range 0- 999kWh; frequency range 45-65Hz; power factor range 0-1PF
  • Overload alarm function: When the active power value exceeds the preset value, the backlight and the power supply flash at the same time to send an alarm. The alarm value can be set by yourself (please set the value for the first use). This module is suitable for indoor use, please do not use it outdoors
  • Large-screen LCD display, with automatic data storage function, can automatically store the status information when the power is off. (Note: The external load should not exceed the rated power; the wiring sequence cannot be wrong)
  • This digital meter can only measure active power, not apparent power. If you measure the power of a DC-AC inverter, please make sure it is a pure sine wave, otherwise the meter may be burned or melted
  • Push-in terminal design, easy installation and disassembly, can be used in home appliances, high and low voltage distribution cabinets, inverter power supplies, electrical maintenance, assembly line detection, photovoltaic systems, etc

Product description

CERRXIAN AC Digital Meter AC 80-260V 100A Current Voltage Power Energy Panel Monitor Detector
1.Measure all key electrical parameters(voltage, current,active power energy,frequency,power factor)
2.Overload alarm: when the preset power value is exceeded,the backlight and power figures will flash
3.The energy data can be reset via the button on the right side of the display
4.Switchable (on/off) backlight
5.Large and clear LCD screen
6.Power off to store data
7.Specifications
.Working voltage: 80~260VAC
.Test voltage: 80~260VAC
.Rated power: 100A/22000W
.Working frequency:45-65Hz
.Measurement accuracy: 1.0 class
8.Set the threshold value for the current alarm
Step 1:Long press the button until “SET CLr” is displayed on the LCD screen, then release the button to enter the setting status
Step 2:The window shows the current value of the power alarm and the last digit starts flashing. You can then briefly press plus 1.If there is no operation for 3 seconds,the digit position is switched automatically.The setting method is the same as above.
Step 3:When you finish the setting and press and hold the button for 5 seconds, it will save and exit automatically. The range of the active power threshold is between 0.0 and 2.5 kW.
9.Backlight control
Briefly press the button to turn the backlight on or off. The backlight has a memory function and can save the on or off status when switched off.
10.Reset energy
Step 1:Press the button for 5 seconds until the energy value flashes, then release the button.
Step 2:Briefly press the button again, the energy value is then deleted and the flashing reset state is exited.
Step 3:If the key is not operated within 5 seconds, it means that the energy value is not cleared and the reset state is ended.
11.Packaging
1 x Digital AC Multi-function Meter
1 x Closed CT
1 x Instructions for use (English version)

SKU: B09V7CLPCR
Weight: 110 g
Dimensions: 11.2 x 7.2 x 3.6 cm; 110 Grams
Part: CX2022031006
Batteries Required: No
Batteries Included: No
Manufacture: CERRXIAN
Reference: CX2022031006