InLoveArts 3D Filament Dehydrator EIBOS FilamentDryer for 4 rolls of 0.5kg filaments/2 rolls of 1kg filaments/1 roll of 3kg filament, Filament Dryer Box with Humidity Temperature Monitoring
REGULAR PRICE: £134.36
About this item
- ðãLarge CapacityãCYCLOPES has a large inside space, Can use 4 rolls of 0.5kg filaments/2 rolls of 1kg filaments/1 roll of 3kg filament at the same time, Suitable for multiformat filaments which including 1.75mm/2.85mm/3mm.(Maximum size: double reel Ï217x80mm / single reel Ï217x174mm) (humidity sensor uses A76/LR44 button batteries, the package does not contain batteries, please purchase by yourself)
- ðãReal-time Humidity MonitoringãIndependent humidity detectorï¼digital display. The measuring range is from 10%to 99%. At the time when CYCLOPES is working, the humidity inside the box can drop to as low as 10%. You can view the product description link: https://www.youtube.com/watch?v=cbDxt4GcfFQ
- ðãClosed-loop Constant HeatingãReal-time monitoring of the temperature in the box, keeping the temperature in the box constant by using the closed-loop intermittent heating mode. Hot air heating makes drying more efficient; the unique air duct design makes CYCLOPES conform to the principle of air thermodynamics, and the filament is heated more evenly.
- ðãAdjustable Heating Temperature/TimeãThe drying temperature can be set and the operation process is simple. The temperature can be set in a wider range, up to 70°C. The heating time can be set based on your requirementï¼the countdown setup is from Oh to 24 hours and the shutdown is accurate to minute. You can set unlimited heating as well. In this settingï¼CYCLOPES is in the normally open state.
- ðãDrying & Printing Same TimeãCYCLOPES is able to achieve drying while printing. A total of 8 holes are set on the shell to make multi-directional outlets possible which in order to satisfy the use of various types of printer or multiple printers use at the same time.
Product Description
- Independent humidity detector, digital display. The measuring range is 10 to 99%. When CYCLOPES is in operation, the humidity level in the box can be up to 10%.
- The drying temperature can be adjusted and the operation process is simple. The temperature can be set in a wide range up to 70 ° C.
- The basic components of CYCLOPES are made of flame retardant VO materials. A built-in temperature protection switch is also included ï¼ automatic tripping in the event of overheating. This makes CYCLOPES even safer.
8 sets of filament rack bearingsCYCLOPS uses 8 bearings to support the filament, the movement of the filament is more stable, and the pressure is stable. Can effectively avoid knotting and pinching the pressure wire. | Visualize temperature / humidity / timeThe heating time can be set according to your wishes, the countdown is set from 0h to 24h and it is switched off to the minute. You can also heat indefinitely. With this setting, CYCLOPES is in the normally open state. | Optimized heating methodThe hot air heating makes drying more efficient; Due to the unique air duct design, CYCLOPES corresponds to the principle of air thermodynamics and the filament is heated more evenly. |
Memory setting parametersThe parameters last set can be saved automatically and are not affected by a power failure. | Dry & print at the same timeCYCLOPES can dry out during printing. A total of 8 holes are made on the shell to enable multidirectional outlets, which are suitable for using different types of printers or for using several printers at the same time. | Fire retardant materialThe core components of CYC LOPES consist of VO flame retardant materials. A built-in temperature protection switch is also included ï¼ automatic triggering via temperature, making the CYCLOPE even safer. |
SKU: | B094Y217KL |
Weight: | 2 kg |
Dimensions: | 37.4 x 31.4 x 25.7 cm; 2 Kilograms |
Brand: | InLoveArts |
Manufacture: | InLoveArts |
Reference: | MTEV1620978603789 |
Product Description
- Independent humidity detector, digital display. The measuring range is 10 to 99%. When CYCLOPES is in operation, the humidity level in the box can be up to 10%.
- The drying temperature can be adjusted and the operation process is simple. The temperature can be set in a wide range up to 70 ° C.
- The basic components of CYCLOPES are made of flame retardant VO materials. A built-in temperature protection switch is also included ï¼ automatic tripping in the event of overheating. This makes CYCLOPES even safer.
|
|
|
---|---|---|
8 sets of filament rack bearingsCYCLOPS uses 8 bearings to support the filament, the movement of the filament is more stable, and the pressure is stable. Can effectively avoid knotting and pinching the pressure wire. | Visualize temperature / humidity / timeThe heating time can be set according to your wishes, the countdown is set from 0h to 24h and it is switched off to the minute. You can also heat indefinitely. With this setting, CYCLOPES is in the normally open state. | Optimized heating methodThe hot air heating makes drying more efficient; Due to the unique air duct design, CYCLOPES corresponds to the principle of air thermodynamics and the filament is heated more evenly. |
|
|
|
---|---|---|
Memory setting parametersThe parameters last set can be saved automatically and are not affected by a power failure. | Dry & print at the same timeCYCLOPES can dry out during printing. A total of 8 holes are made on the shell to enable multidirectional outlets, which are suitable for using different types of printers or for using several printers at the same time. | Fire retardant materialThe core components of CYC LOPES consist of VO flame retardant materials. A built-in temperature protection switch is also included ï¼ automatic triggering via temperature, making the CYCLOPE even safer. |